India's fastest growing Alloy manufacturing and recycling firm.

ALUMINUM ALLOY INGOT

Sims Metacast > ALUMINUM ALLOY INGOT

ALUMINUM ALLOY INGOT

We produce and provide a large variety of aluminum alloy ingots that are fully compliant with Euro 6 standards. Our PAPL aluminum alloys are used extensively in a variety of aluminum pressure die-casting operations, the production of automotive parts, the manufacture of building and construction materials, etc. We have established ourselves as one of India’s top producers and exporters of aluminum alloy ingots and pure aluminum ingots over the years. Our ingots, which are made from the highest quality alloy, are valued for helping cars burn less fuel and use less power. Our product line is recyclable because it supports sustainable development and the environment.

ALUMINUM ALLOYS AS PER INTERNATIONAL STANDARDS

BS1490:1970 IS617:1959 Si Fe Cu Mn Mg Zn Ni Ti Pb Al
LM0 A0 0.30 Max 0.40 Max 0.03 Max 0.03 Max 0.03 Max 0.07 Max 0.03 Max 0.03 Max BAL
LM1 A1 2.0-4.0 1.0 Max 6.0-8.0 0.60 Max 0.15 Max 2.0-4.0 0.50 Max 0.20 Max 0.03 Max BAL
LM2 A2 9.0-11.5 1.0 Max 0.70-2.50 0.50 Max 0.30 Max 2.0 Max 0.50 Max 0.20 Max 0.03 Max BAL
LM3 A3 1.30 Max 1.0 Max 2.50-4.50 0.50 Max 0.10 Max 9.0-13.0 0.50 Max 0.20 Max 0.03 Max BAL
LM4 A4 4.0-6.0 0.80 Max 2.00-4.00 0.2-0.6 0.15 Max 0.50 Max 0.30 Max 0.20 Max 0.10 Max BAL
LM5 A5 0.30 Max 0.60 max 0.10 Max 0.3-0.7 3.0-6.0 0.10 Max 0.10 Max 0.05 Max 0.05 Max BAL
LM6 A6 10.0-13.0 0.60 Max 0.10 Max 0.50 Max 0.10 Max 0.10 Max 0.10 Max 0.10 Max 0.10 Max BAL
LM7 A7 1.5-3.5 0.3-0.4 1.0-2.50 0.10 Max 0.05-0.2 0.10 Max 0.50-1.70 0.05 Max 0.05 Max BAL
LM8 A8 3.5-6.0 0.60 Max 0.10 Max 0.50 Max 0.3-0.8 0.10 Max 0.10 Max 0.05 Max 0.10 Max BAL
LM9 A9 10.0-13.0 0.60 Max 0.10 Max 0.3-07 0.2-0.6 0.10 Max 0.10 Max 0.20 Max 0.10 Max BAL
LM10 A10 0.25 Max 0.35 Max 0.10 Max 0.10 Max 9.5-11.0 0.10 Max 0.10 Max 0.20 Max 0.05 Max BAL
LM11 A11 0.25 Max 0.25 Max 4.0-5.0 0.10 Max 0.10 Max 0.10 Max 0.10 Max 0.05 Max 0.05 Max BAL
LM12 A12 2.50 Max 1.00 Max 9.0-11.0 0.60 Max 0.2-0.4 0.80 Max 0.50 Max 0.20 Max 0.10 Max BAL
LM13 A13 10.0-13.0 1.00 Max 0.70-1.50 0.50 Max 0.8-1.50 0.50 Max 1.50 Max 0.20 Max 0.10 Max BAL
LM14 A14 0.60 Max 0.60 Max 3.5-4.5 0.60 Max 1.2-1.7 0.10 Max 1.8-2.3 0.05 Max 0.05 Max BAL
LM15 A15 0.60-2.00 0.80-1.40 0.3-3.0 0.10 Max 0.5-1.7 0.10 Max 0.5-2.0 0.05 Max 0.05 Max BAL
LM16 A16 4.50-6.00 0.60 Max 1.0-1.5 0.50 Max 0.4-0.6 0.10 Max 0.25 Max 0.20 Max 0.10 Max BAL
LM18 A18 4.5-6.0 0.60 Max 0.10 Max 0.50 Max 0.10 Max 0.10 Max 0.10 Max 0.20 Max 0.10 Max BAL
LM20 – 10.0-13.0 1.0 Max 0.40 Max 0.5 Max 0.2 Max 0.2 Max 0.1 Max 0.2 Max 0.1 Max BAL
LM21 – 5.0-7.0 1.0 Max 3.0-5.0 0.2-0.6 0.1-0.3 2.0 max 0.3 Max 0.2 Max 0.2 Max BAL
LM22 A22 4.0-6.0 0.60 Max 2.8-3.8 0.2-0.6 0.05 Max 0.15 max 0.15 Max 0.2 Max 0.1 Max BAL
LM23 – 1.2-2.8 0.8-1.4 0.8-2.0 0.1 Max 0.05-0.2 0.10 Max 0.8-1.7 0.05 Max 0.05 Max BAL
LM24 A24 7.5-9.5 1.3 Max 3.0-4.0 0.5 Max 0.30 Max 3.0 max 0.1 Max 0.2 Max 0.3 Max BAL
LM25 A25 6.5-7.5 0.5 Max 0.1 Max 0.3 Max 0.2-0.45 0.1 Max 1.0 Max 0.2 Max 0.1 Max BAL
LM26 A26 8.5-10.5 1.2 Max 2.0-4.0 0.5 Max 0.5-1.5 1.0 Max 0.3 Max 0.2 Max 0.2 Max BAL
LM27 A27 6.0-8.0 0.8 Max 1.5-2.5 0.2-0.6 0.3 Max 1.0 Max 0.8-1.5 0.2 Max 0.2 Max BAL
LM28 A28 17.0-20.0 0.7 Max 1.3-1.8 0.6 Max 0.8-1.5 0.2 Max – 0.2 Max 0.1 Max BAL
LM29 A29 22.0-25.0 0.7 Max 0.8-1.3 0.6 Max 0.8-1.3 0.2 Max 0.8-1.3 0.2 Max 0.1 Max BAL
LM30 A30 16.0-18.0 1.1 Max 4.0-5.0 0.3 max 0.4-0.7 0.2 Max 0.1 Max 0.2 Max 0.1 Max BAL
ALSI-62 – 5.5-7.0 0.4 Max 1.8-2.5 0.2-0.6 0.3-0.7 – – 0.2 Max – BAL
ALSI-132 – 11.0-12.5 1.0 Max 1.75-2.5 0.5 Max 0.3 Max 1.4 Max 0.3 Max 0.1 Max 0.1 Max BAL
Alloy Si Fe Cu Mn Mg Zn Ni Ti Pb Sn Cr Al
ADC1 11.0-13.0 0.9 Max 1.0 Max 0.3 Max 0.3 Max 0.5 Max 0.5 Max – – 0.1 Max – BAL
ADC3 9.0-10.0 0.9 Max 0.6 Max 0.3 Max 0.4-0.6 0.5 Max 0.5 Max – – 0.1 Max – BAL
ADC5 0.3 Max 1.1 Max 0.2 Max 0.3 max 4.1-8.5 0.1 Max 0.1 Max – – 0.1 Max – BAL
ADC6 1.0 Max 0.8 Max 0.1 Max 0.4-0.6 2.6-4.0 0.4 Max 0.1 Max – – 0.1 Max – BAL
ADC10 7.5-9.5 0.9 Max 2.0-4.0 0.5 Max 0.3 Max 1.0 Max 0.5 Max – – 0.3 Max – BAL
ADC12 9.6-12.0 1.3 Max 1.5-3.5 0.5 Max 0.3 Max 1.0 Max 0.5 Max – – 0.3 Max – BAL
ADC14 16.0-18.0 0.9 Max 4.0-5.0 0.5 Max 0.5-0.65 1.5 Max 0.3 Max – – 0.3 Max – BAL
AC1A 1.20 Max 0.50 Max 4.0-5.0 0.30 Max 0.15 Max 0.30 Max 0.05 Max 0.25 Max 0.05 Max 0.05 Max 0.05 Max BAL
AC1B 0.02 Max 0.35 Max 4.0-5.0 0.10 Max 0.15-0.35 0.10 Max 0.05 Max 0.05-0.30 0.05 Max 0.05 Max 0.05 Max BAL
AC2A 4.0-6.0 0.80 Max 3.0-4.5 0.55 Max 0.25 Max 0.55 Max 0.30 Max 0.20 Max 0.15 Max 0.05 Max 0.15 Max BAL
AC2B 5.0-7.0 1.00 Max 2.0-4.0 0.50 Max 0.50 Max 1.00 Max 0.35 Max 0.20 Max 0.20 Max 0.10 Max 0.20 Max BAL
AC3A 10.0-13.0 0.80 Max 0.25 Max 0.35 Max 0.15 Max 0.30 Max 0.10 Max 0.20 Max 0.10 Max 0.10 Max 0.15 Max BAL
AC4A 8.0-10.0 0.55 Max 0.25 Max 0.3-0.6 0.30-0.60 0.25 max 0.10 Max 0.20 Max 0.10 Max 0.05 Max 0.15 Max BAL
AC4B 7.0-10.0 1.00 Max 2.0-4.0 0.50 Max 0.50 Max 1.00 Max 0.35 Max 0.20 Max 0.20 Max 0.10 Max 0.20 Max BAL
AC4C 6.5-7.5 0.55 Max 0.25 Max 0.35 Max 0.25-0.45 0.35 Max 0.10 Max 0.20 Max 0.10 Max 0.55 Max 0.10 Max BAL
AC4CH 6.5-7.5 0.20 Max 0.20 Max 0.10 Max 0.20-0.40 0.10 Max 0.05 Max 0.20 Max 0.05 Max 0.05 Max 0.05 Max BAL
AC4D 4.5-5.5 0.60 Max 1.0-1.5 0.50 Max 0.4-0.6 0.30 Max 0.20 Max 0.20 Max 0.10 Max 0.05 Max 0.15 Max BAL
AC5A 0.60 Max 0.80 Max 3.5-4.5 0.35 Max 1.2-1.8 0.15 Max 1.7-2.3 0.20 Max 0.05 Max 0.05 Max 0.15 Max BAL
AC7A 0.20 Max 0.30 Max 0.10 Max 0.60 Max 3.5-5.5 0.15 Max 0.05 Max 0.20 Max 0.05 Max 0.05 Max 0.15 Max BAL
AC7B 0.20 Max 0.30 Max 0.10 Max 0.10 Max 9.5-11.0 0.10 Max 0.05 Max 0.20 Max 0.05 Max 0.05 Max 0.15 Max BAL
AC8A 11.00-13.0 0.80 Max 0.8-1.3 0.15 Max 0.7-1.3 0.15 Max 0.8-1.5 0.20 Max 0.05 Max 0.05 Max 0.10 Max BAL
AC8B 8.5-10-5 1.00 Max 2.0-4.0 0.50 Max 0.50-1.5 0.50 Max 0.10-1.0 0.20 Max 0.10 Max 0.10 Max 0.10 Max BAL
AC8C 8.5-10.5 1.00 Max 2.0-4.0 0.50 Max 0.50-1.6 0.50 Max 0.50 Max 0.20 Max 0.10 Max 0.10 Max 0.10 Max BAL
AC9A 22.0-24.0 0.80 Max 0.50-1.5 0.50 Max 0.50-1.7 0.20 Max 0.50-1.5 0.20 Max 0.10 Max 0.10 Max 0.10 Max BAL
AC9B 18.2 0.80 Max 0.50-1.6 0.50 Max 0.50-1.8 0.20 Max 0.50-1.0 0.20 Max 0.10 Max 0.10 Max 0.10 Max BAL
ANSI UNS Si Fe Cu Mn Mg Zn Ni Ti Pb Al
201.2 A02012 0.1 Max 0.1 Max 4.0-5.2 0.2-0.5 0.2-0.55 – – – – BAL
204.2 A02042 0.15 Max 0.1-0.2 4.2-4.9 0.05 Max 0.2-0.35 0.05 Max 0.03 Max 0.15-0.35 – BAL
208.1 A020B1 2.5-3.5 0.9 Max 3.5-4.5 0.5 Max 0.1 Max 1.0 Max 0.35 Max 0.15-0.25 – BAL
208.2 A020B2 2.5-3.5 0.8 Max 3.5-4.6 0.3 Max 0.03 Max 0.2 Max – 0.25 Max – BAL
222.1 A02221 2.0 Max 1.2 Max 9.2-10.7 0.5 Max 0.2-0.35 0.8 Max 0.5 Max 0.2 Max – BAL
241.1 A02421 0.7 Max 0.8 Max 3.5-4.5 0.35 Max 1.3-1.8 0.35 Max 1.7-2.3 0.25 Max 0.25 Max BAL
242.2 A02422 0.6 Max 0.6 Max 3.5-4.5 0.1 Max 1.3-1.8 0.1 Max 1.7-2.3 0.25 Max – BAL
A242.1 A12421 0.6 Max 0.6 Max 3.7-4.5 0.1 Max 1.3-1.7 0.1 Max 1.8-2.3 0.2 Max 0.15-0.25 BAL
A242.2 A12422 0.35 Max 0.6 Max 3.7-4.6 0.1 Max 1.3-1.7 0.1 Max 1.8-2.3 0.07-0.20 0.15-0.25 BAL
295.1 A02951 0.7-1.5 0.8 Max 4.0-5.0 0.35 Max 0.03 Max 0.35 Max – 0.07-0.20 – BAL
295.2 A02952 0.7-1.2 0.8 Max 4.0-5.0 0.3 Max 0.03 Max 0.3 Max – 0.25 Max – BAL
296.1 2.0-3.0 0.9 Max 4.0-5.0 0.35 Max 0.05 Max 0.5 Max 0.35 Max 0.2 Max – BAL
296.2 2.0-3.0 0.8 Max 4.0-5.0 0.3 Max 0.03 Max 0.3 Max – 0.25 Max – BAL
308.1 A03081 5.6-6.0 0.8 Max 4.0-5.0 0.5 Max 0.1 Max 1.0 Max – 0.2 Max – BAL
308.2 A03082 5.0-6.0 0.8 Max 4.0-5.0 0.3 Max 0.1 Max 0.5 Max – 0.25 Max – BAL
319.1 A03191 5.5-6.5 0.8 Max 3.0-4.0 0.5 Max 0.1 Max 1.0 Max 0.35 Max 0.2 Max – BAL
319.2 A03192 5.5-6.5 0.6 Max 3.0-4.0 0.1 Max 0.1 Max 0.1 Max 0.1 Max 0.25 Max – BAL
328.1 A03281 7.5-8.5 0.8 Max 1.0-2.0 0.2-0.6 Max 0.25-0.6 1.5 Max 0.25 Max 0.2 Max 0.25 Max BAL
332.1 A03321 8.5-10.5 0.9 Max 2.0-4.0 0.5 Max 0.6-1.5 1.0 Max 0.5 Max 0.25 Max – BAL
332.2 A03322 8.5-10.0 0.6 Max 2.0-4.0 0.1 Max 0.9-1.3 0.1 Max 0.1 Max 0.25 Max – BAL
333.1 A03331 8.0-10.0 0.8 Max 3.0-4.0 0.5 Max 0.1-0.5 1.0 Max 0.5 Max 0.2 Max – BAL
336.1 A03361 11.0-13.0 0.9 Max 0.5-1.5 0.35 Max 0.8-1.3 0.35 Max 2.0-3.0 0.25 Max – BAL
336.2 A03362 11.0-13.0 0.9 Max 0.5-1.5 0.1 Max 0.9-1.3 0.1 Max 2.0-3.0 – – BAL
354.1 A03541 8.6-9.4 0.15 Max 1.6-2.0 0.1 Max 0.45-0.6 0.1 Max – 0.2 Max – BAL
355.1 A03551 4.5-5.5 0.5 Max 1.0-1.5 0.5 Max 0.45-0.6 0.35 Max – 0.25 Max 0.25 Max BAL
355.2 A03552 4.5-5.5 0.14-0.25 1.0-1.5 0.05 Max 0.5-0.6 0.05 Max – 0.2 Max – BAL
C355.2 A33552 4.5-5.5 0.13 Max 1.0-1.5 0.05 Max 0.5-0.6 0.05 Max – 0.2 Max – BAL
356.1 A03561 6.5-7.5 0.5 Max 0.25 Max 0.35 Max 0.25-0.45 0.35 Max – 0.2 Max – BAL
356.2 A03562 6.5-7.5 0.13-0.25 0.1 Max 0.05 Max 0.3-0.45 0.05 Max – 0.25 Max – BAL
357.1 A03571 6.5-7.5 0.12 Max 0.05 Max 0.03 Max 0.45-0.6 0.05 Max – 0.2 Max – BAL
A357.2 A13570 6.5-7.5 0.12 Max 0.1 Max 0.05 Max 0.45-0.7 0.05 Max – 0.04-0.2 – BAL
359.2 A03592 8.5-9.5 0.12 Max 0.1 Max 0.1 Max 0.55-0.7 0.1 Max – 0.2 Max – BAL
360.2 A03602  9.0-10 0.7-1.1 0.1 Max 0.1 Max 0.45-0.6 0.4 Max 0.1 Max 0.15 Max – BAL
A360 A0360  9.0-10 1.3 Max 0.6 Max 0.35 Max 0.4-0.6 0.5 Max 0.5 Max – – BAL
A360.1 A13601  9.0-10 1.0 Max 0.6 Max 0.1 Max 0.45-0.6 0.4 Max – – – BAL
A360.2 A13602  9.0-10 0.6 Max 0.1 Max 0.05 Max 0.45-0.6 0.05 Max – – – BAL
380.2 A03802 7.5-9.5 0.7-1.1 3.0-4.0 0.1 Max 0.1 Max 0.1 Max 0.1 Max 0.1 Max – BAL
A380 A0380 7.5-9.5 1.3 Max 3.0-4.0 0.5 Max 0.3 Max 3.0 Max 0.5 Max 0.5 Max – BAL
A380.1 A13801 7.5-9.5 1.0 Max 3.0-4.0 0.5 Max 0.1 Max 2.9 Max 0.5 Max – – BAL
A380.2 A03602 7.5-9.5 0.6 Max 3.0-4.0 0.1 Max 0.1 Max 0.1 Max 0.1 Max 0.1 Max – BAL
A383 A0383 9.5-11.5 1.3 Max 2.0-3.0 0.5 Max 0.1 Max 0.3 Max 0.3 Max – – BAL

ALUMINUM ALLOYS AS PER CUSTOMER SPECIFICATION AND CUSTOMIZED MICROSTRUCTURE DESIGN

  • Alloys for PGCIL Application Gravity / Sand Casting Primary Alloys
  • High Purity LPDC Alloys
  • Pressure Die Casting Alloys
  • Investment Casting Alloys
  • Aluminum Master Alloys
  • Masters of Ti / B / Ti-B / Fe / Cu / Cr / Ni / Mn / etc

GENERAL USES OF ALUMINIUM ALLOYS

  • L.M. 0 Sand Castings for Electrical, Chemical, Food Applications
  • L.M. 2 Widely used Alloy for all Types of Die Castings
  • L.M. 4 The most versatile Alloy with very good castings characteristics. UTS can be greately increased after heat treatment
  • L.M. 5 Castings required maximum resistance to corrosion such as marine components can be casted in such and chill
  • L.M. 6 Very suitable for large intricate thin walled castings in all type of moulds
  • L.M. 9 Common to L.M.6 characteristics but higher U.T.S. after heat treatment
  • L.M. 10 Suitable for sand and chill castings with high strenth and shock resistance require special foundry technique; heat treated
  • L.M. 11 Suitable for die and centrifugal castings
  • L.M. 12 Mainly used where a very good machined surface finished and hardness is required
  • L.M. 13 Used in piston castings
  • L.M. 16 Castings requiring high mechanical properties can be casted in sand or chill process
  • L.M. 18 High resistance to corrosion with good foundry characteristics
  • L.M. 22 Used for chill castings requiring good foundry characteristics and ductility. Requires heat treatment
  • L.M. 24 One of the two most widely used alloys for all types of castings
  • L.M. 25 Suitable where good resistance to corrosion combined with high strength is required
  • L.M. 28 Piston alloy with lower coefficient of expansion than LM 13
  • L.M. 29 As LM 28 but lower coefficient of expansion
  • L.M. 30 For unlined die cast cylinder block with low expansion and excellent wear resistance